Vivid color
Full-color artwork with crisp edges and a solid white underbase.
Professional DTF transfers, made in our shop
Professional DTF Transfers
Full-color, ready-to-press transfers with sharp detail, dependable adhesion, and flexible ordering for one design or a custom-built sheet.
No setup feeFull-color detailReady to press
Powered by real equipment
Printed here. Checked here. Shipped from here.
Your artwork moves through real Certified Printz production equipment—not a third-party mystery printer.
Professional equipment. Consistent color. Production-ready transfers.
DIY DTF transfers
We print. You press.
Order transfers for cotton, polyester, blends, workwear, team apparel, and more. Use them for one-off projects, repeat orders, or everyday production.
Built to last
A flexible print made for regular wear when pressed and cared for correctly.
Press ready
Prepared for straightforward heat-press application in your own shop.
Artwork check
Check before you print.
Upload your DTF artwork for a quick review of resolution, backgrounds, edges, small details, contrast, and cropping.
Your artwork is analyzed for this check only. Certified Printz still completes the final production review.
How to apply
Press your transfer in 4 easy steps
Settings recommended for Lancelot DTF film. Always test on a scrap first if you can.
This is a COLD PEEL film
Let it cool all the way down before peeling. Peeling while warm can pull the ink off.
Heat Press
Best results- Heat: 300–320°F
- Time: 12–15 sec
- Pressure: Medium-firm
- Peel: Cold
Close the press and let it do the work.
Cricut EasyPress
Great at home- Heat: 320–330°F
- Time: 20–25 sec
- Pressure: Firm — lean on it with both hands
- Peel: Cold
Hold still. Don't slide it around.
Home Iron
Works in a pinch- Heat: Cotton / highest setting
- Time: 20–25 sec per spot
- Pressure: Hard — use a table, not an ironing board
- Peel: Cold
Turn steam OFF and empty the water.
- 1
Press the blank shirt for 5 seconds to remove moisture and wrinkles.
- 2
Lay the transfer ink-side down, film on top, and press using your tool's settings.
- 3
Wait until it's completely cool to the touch, then peel the film off slowly.
- 4
Cover with parchment paper and press 5 more seconds to lock it in.
Wait 24 hours before washing. Wash inside out, cold water, low heat dry.